9.5%Cr Steel, 28,000Kg, finish machined, fabricated & Pressure Tested
1000MW main stop and control valve comprising three castings and a welded on forging. For operation at 620°C and supplied to the Chinese market.
9.5%Cr Steel, 49,895Kg, finish machined, fabricated & Pressure Tested
1000MW main stop and control valve – left and right hand assembly. Welded assembly from eight castings for ultra-supercritical operation.
CrMoV Steel, 18,000Kg, finish machined, fabricated & Pressure Tested
500MW tri-chest assembly on horizontal boring operations supplied to the UK power market.
CrMoV Steel, 18,000Kg, Fabricated & Finish Machined
500MW tri-chest assembly subject to hardness testing supplied fully machined and pressure tested.
9.5%Cr Steel, 34,000Kg, finish machined, fabricated & Pressure Tested
660MW steam valve and cover subject to final dimensional inspection.
9.5%Cr Steel, 68,000Kg, finish machined, fabricated & Pressure Tested
660MW turbine components comprising of LH & RH main stop valves with machined and fabricated bonnets and filter baskets prior to assembly.
9.5%Cr Steel, 23,000Kg, finish machined, fabricated & Pressure Tested
660MW main steam valves, finished machined and pressure tested supplied to the India market.
CrMoV, 10,000Kg, finish machined, fabricated & Pressure Tested
500MW main stop and governor valve supplied for a UK power station refurbishment.
CrMoV, 3,200Kg, fabricated casting assembly
Reverse engineered cast steam tubes subject to in process dimensional inspection prior to fabrication welding.
ASTM A352 WCB Carbon Steel, 5,000Kg, finish machined & pressure tested
Power station recirculating feed pump to ASME requirements as part of a refurbishment programme to manufacture replacement cooling tower pumps.
CrMoV Steel, 9500Kg, finish machined, fabricated & Pressure Tested
Steam chest assembly subject to final dimensional inspection.
9.5%Cr steel, 12,500Kg, fabricated, finished machined & Nitride coated
Intermediate pressure inlet pipes, fabricated from four castings.
9.5%Cr steel, 44,750Kg, proof machined
Supplied to the India market in the proof machined condition.
9.5%Cr steel, 44,750Kg, proof machined
Supplied to the India market in the proof machined condition.
CrMoV Steel, 18,500Kg, fully assembled
600MW two port main stop valves suppled for supercritical operation, supplied finish machined and assembled as a working valve, pressure and function tested prior to despatch.
9.5%Cr steel, 23,000Kg, fully assembled
600MW reheat RSV-IV valves supplied fully assembled with actuator arms, regulators and internal filters.
CrMoV steel, 17,600Kg, finish machined, fabricated & Pressure Tested
600MW MSV manifold fabricated to two stop valves supplied to the Chinese market.
9.5%Cr steel, 23,000Kg, finish machined, fabricated & Pressure Tested
600MW main steam valve supplied in the finished machined, fabricated & pressure tested condition.
CrMoV steel, 9,500Kg, fabricated & finish machined
20 inch re-heat valve for the circulation of steam between the high and low pressure turbines. Produced as a three casting fabricated assembly.
CrMoV steel, 2,400Kg, finish machined
Finish machined cast bonnets supplied for 12inch steam valves. Supplied to the US market.